Precision Mold Design & Manufacturing

Pierce, Parting and V-Bend Die Set for an 18×42 Sheet Link

Model: N/A

3D model of Pierce, Parting and V-Bend Die Set for an 18×42 Sheet Link

Tính năng nổi bật

Compact punch and die set with a fixed stripper: two Ø8 holes, pilots, parting of an 18×42 link with R9 ends from an 18×2 mm strip at a 47 mm pitch, plus a 90° V-bend station. The animated 3D model keeps the original design and shows where the V station needs improvement. Rotate the model right on this page.

  • Four stations on one compact die set: piercing of two Ø8 holes, pilots for pitch location, parting with an R9 double-arc punch, and a 90° V-bend with a 40 mm wide, 20 mm deep V die.
  • 18 × 2 mm strip at a 47 mm pitch; fixed stripper with strip guides on both sides; piercing slugs and the parting scrap drop through a 33 × 98 mm opening in the lower shoe.
  • The 3D model runs on a constant-speed crank at 40 strokes per minute with a 40 mm stroke; every screw carries a real thread, and the part and slugs leave the die each stroke.
  • The original design is kept for study: the V station sits 2 mm from the parting line, so the V punch acts on the strip end during the cutting stroke and the part has to be taken out by hand — the model shows this honestly.
  • ZINITEK improvement path: re-lay the part across the strip as a progressive die with the bend line parallel to the feed and a V groove running to the die edge so parts slide out by themselves; pillar and ball-cage guiding; cutting parts in SKD11 hardened to 58–62 HRC.
  • Order to your drawing: send the part drawing, material and thickness, volume and press data, and ZINITEK will propose the strip layout and die design.