Precision Mold Design & Manufacturing

Compound Die for a 2.5 mm Two-Hole Plate

Model: N/A

3D model of Compound Die for a 2.5 mm Two-Hole Plate

Tính năng nổi bật

Inverted compound die for a 25 × 87.7 × 2.5 mm link plate with Ø12.5 and Ø10.5 holes: blanking and both holes in one stroke, accurate hole positions, flat parts. Rotate the animated 3D model right on this page.

  • Inverted compound layout: the blanking punch in the lower die carries the two piercing dies; the blanking die and the Ø12.5 / Ø10.5 piercing punches sit in the upper die — one stroke, one finished plate.
  • Both holes and the outline are cut together, so hole-to-edge distances are fixed by the die, with none of the re-location error of separate simple dies.
  • A lower stripper on 14 springs, hung on shoulder bolts, lifts the strip 6 mm off the punch; 8 guide pins keep the strip in its lane.
  • A Ø12 positive knock-out runs through the upper shoe: at top dead centre the press knock-out bar drives the shedder down 5.5 mm and ejects the part; both pierce slugs drop through the lower shoe.
  • Guided by 2 diagonal Ø38 pillars with bushes; cutting parts in SKD11 at 58–62 HRC, plates in S50C to keep cost down; standard screws, dowels and springs.
  • Order to your drawing: send the part drawing, material and thickness, volume and press data, and ZINITEK will propose the die type that fits your cost.