Precision Mold Design & Manufacturing

Metal Clip Stamping Die

ZINITEK progressive die for metal clips with a side-acting cam, shown as a 3D model running like a 30 spm press. Discuss a die for your drawing or sample.

3D model of Metal Clip Stamping Die

3D model

The view-only 3D model shows the upper die, stripper, lower die and strip running like a 30 spm crank press. Hide the upper die, the punches or the stripper, switch on the architecture view and slow motion to watch the cam slide fold the clip hook.

Main construction

Pilot piercing, two-sided blanking, rib and hook bending, hook folding by a side cam (driver on the stripper, 5 mm slide, spring return), U-wrap over a core and cut-off. Heavy-spring stripper with travel stops, 4 Ø40 guide pillars, scrap exits through the die shoe.

Discuss a die for your part

Send a drawing or sample with material, thickness, volume and press data, and ZINITEK will discuss the design and manufacturing approach.

Send a die design or manufacturing request

Project Gallery

Metal Clip Stamping Die 1
Metal Clip Stamping Die 2
Metal Clip Stamping Die 3
Metal Clip Stamping Die 4
Metal Clip Stamping Die 5
Metal Clip Stamping Die 6
Metal Clip Stamping Die 7