Precision Mold Design & Manufacturing

Inverted Compound Die for Sheet-Steel Washers

ZINITEK project: an inverted compound die that pierces and blanks Ø130/Ø80 washers in one stroke, with an animated 3D model. Discuss a die solution from your drawing or sample.

3D model of Inverted Compound Die for Sheet-Steel Washers

3D model

Inverted compound die for 1 mm Ø130/Ø80 washers: the view-only 3D model runs a full cycle — steady crank motion, the die clamps the strip on the stripper, the piercing and blanking punches cut together, the slug drops through the shoe, the shedder pushes the part back into the strip and the part is blown off. The “Architecture view” button fades the frame plates to show the punches, dies and springs inside.

Main construction

Lower die: shoe, backing plate, punch holder, blanking punch / piercing die and a stripper on 6 springs. Upper die: blanking die, Ø80 piercing punch, shedder on 6 springs, punch holder, backing plate and upper shoe; 4 guide pillars with bushes.

Discuss a die for your part

Send a drawing or sample with material, thickness, volume and press data, and ZINITEK will discuss the design and manufacturing approach.

Send a die design or manufacturing request

Project Gallery

Inverted Compound Die for Sheet-Steel Washers 1
Inverted Compound Die for Sheet-Steel Washers 2
Inverted Compound Die for Sheet-Steel Washers 3
Inverted Compound Die for Sheet-Steel Washers 4
Inverted Compound Die for Sheet-Steel Washers 5